Apply a coat of finish, and then tone the wood by spraying pigment on the dried finish or wiping on a gel stain. You can dissolve the pigment in a solvent, such as lacquer thinner, or in the finish you’re using, but using a gel stain is the easiest option, requiring only a paintbrush and rag.
People also ask, what is the best finish for maple furniture?
Another commonly used finishing technique on maple is to apply tung oil or linseed oil after the final sanding. These oils tend to bring out the curly or tiger looks of the maple. Follow the oil with a coat or two of shellac. For a more durable finish, top-coat over the shellac with a clear lacquer or polyurethane.
Beside above, can maple furniture be painted?
When painting Maple, use a slow drying enamel paint. maple wood will not soak up the paint as easily as open grained woods such as cherry or walnut. Therefore, using an oil-based enamel will keep the paint from drying out too fast while it is binding with the surface of the wood.
What color stain looks best on Maple?
Because maple has such tight grain, pigment type stains don’t soak into the wood, except where there is a spot with more open grain, as you found out. Try using dyes, such as TransTint or Transfast. There are other brands as well often marketed as aniline dyes.
What stains look good on Maple?
Top 7 Best Stain for Maple Wood| How to Stain Maple Dark
- Minwax Pre-Stain Wood Conditioner.
- Varathane 211759 Premium Wood Stain.
- Minwax Wood Finish Penetrating Stain.
- General Finishes Water-Based Wood Stain.
- Minwax 61350444 Polyshades Stain & Polyurethane.
- Rust-Oleum Ultimate Wood Stain.
- Minwax Gel Stain.
What oil do you use for maple wood?
Tung oil or linseed oil can be used to finish maple and to bring out the curly, or tiger grain of the wood.
Does hard maple stain well?
Maple is one of the most difficult woods to achieve a dark, uniform stain color on because it is a dense, closed grain wood and often absorbs stain very unevenly. … Do not use liquid oil-based stains on Maple because they will blotch. Also, prep sand Maple with 120 grit, followed by 150 grit or 220 grit.
Can you use linseed oil on maple?
Soaking the wood in boiled linseed oil alone can make curly maple really pop. While not a stain or dye, it does enhance the color. Figured maple is beautiful in its own right, but you can really make it stand up and cheer with a bit of color in the curls.
What is the best way to stain maple wood?
Can oak be stained to match maple?
Maple will never match oak. … Maple, by its density and grain structure, does not like to “take” stain the way oak soaks it up.
What is soft maple good for?
Soft maple is used for furniture, kitchen cabinets, doors, musical instruments, turnings and millwork. It is lower-priced than Hard Maple and sometimes used as a substitute. Both Soft Maple and Hard Maple can be purchased in special white color pulls.
