You can remove Thompson’s Water Seal through a variety of techniques, but the simplest is probably to use Earth Smart Solutions’ ESHC Hydrocarbon Cleaner and Degreaser. You also have the option to scrape or sand down the wood to remove it.
Hereof, will paint thinner remove Thompson Water Seal?
The old-timer came up with a similar formula in 3 parts linseed oil, 2 parts Thompson’s Water Seal cut with 1 part paint thinner. The paint thinner acts as a penetrating agent, making the mixture thin enough so that the active ingredients penetrate the wood.
Beside this, how long does Thompson Water Seal stain last?
If applied correctly, Water Seal will last up to 4 years.
Can I stain over Thompson’s water sealer?
Can I stain over water sealer? And actually, the answer is YES—you can use our EMTECH water-based sealer or top coat over the oil stain. The beauty of all our water-based sealers and topcoats is that they’ll level and adhere to whatever solvent- or oil-based stain you’ve used.
Does Thompson water Seal darken wood?
If it beads, rolls off or stands on the surface, but does not darken the surface, it is protected. Thompson’s® WaterSeal® Waterproofers and Exterior Stains penetrate the wood so that even after the beading is gone, the waterproofing protection lasts.
Is it better to seal or stain a deck?
A: It’s really up to you. Just staining the deck will give you the color you want, although in high-traffic areas the stain could wear away quickly. … The advantage of this, they say, is the sealer provides additional protection against water and weather damage, while the stain helps reduce fading from UV rays.
Can you apply Thompson’s water seal with a garden sprayer?
To apply Thompson’s water seal with a sprayer, you can use a garden sprayer with a hose or a pump sprayer. However, the manufacturer of Thompson’s water seal recommends that their product be used with a plastic sprayer and a brass wand.
Can you put too much sealer on wood?
If too much sealer is applied, it cannot be absorbed into the wood. Wood is a fiber, and just like any other fiber it is capable of absorbing only so much. If you wet a sponge, and keep wetting it, eventually it will become oversaturated and the water will just pool on top until you squeeze it out.
