How do you clean floors after construction?

Usually, a post-construction clean up will include the following:

Sweep and vacuum all surfaces, including ceilings and walls.
Sweep, mop, and disinfect floors.
Vacuum all upholstery.
Wipe down doors, knobs, baseboards, moldings, and hardware.

Secondly, how do you get rid of dust after construction?

Wipe Down Hard Surfaces

Start by wiping the dust off your walls – yes, even your walls collect dust during construction. Dry dusting is the safest way to remove the particles without damaging a wall’s surface, but a damp cloth can also be used depending on your type of paint or wall covering.

Keeping this in view, how do you clean laminate floors after construction? First, sweep and vacuum (without a beater brush) to remove all dust and debris from the installation. Next, take the microfiber dust mop and laminate flooring cleaner in a spray bottle, spray the dust mop and go over your entire floor.

Also know, what is included in a builders clean?

Remove all debris, packaging etc. …
Thoroughly clean all bath tubs/wash basins/shower enclosures including ceramic and/or acrylic surrounds and remove all drywall filler, paint, mastic, grout etc. …
Thoroughly clean all shower areas and remove all paint, drywall filler, mastic, grout etc.

How much does it cost to have your house cleaned after construction?

Construction cleanup costs $453 on average with a typical range between $275 and $671 for residential services. For large projects or those that include multiple visits, you might pay up to $3,000. You’ll spend anywhere from $0.10 to $0.50 per square foot or $30 to $50 per hour for per site cleanup pass.

How do you clean builders dust?

To clean the dust away, take a damp cloth and run it gently over each wall until the dust has gone. Be careful with this step if your walls have been painted within the last month, as the damp cloth may ruin the paint.

Can construction dust make you sick?

Once inhaled, the dust can reduce your lung capacity, increase overall strain on your heart, and cause a variety of diseases. You may also experience irritation in your eyes, nose, throat, skin, and lungs. At first, you may think you’re dealing with allergies or a mild cold, but over time, these symptoms can increase.

How long does it take for construction dust to settle?

Particles less than 10µm in diameter (thoracic) will take about 3 minutes to settle. Particles at 5µm in diameter (respirable) will settle in about 8 minutes. Particles with a diameter of 1µm (respirable) will take up to 4 or more hours to settle.