When you hit the “Jets” button on a HotSpring Spa, the jet pump will run on high speed for 2 hours and then shut off. When you hit the “Clean” button, the jet pump will run on high speed for 10 minutes and then shut off.
Moreover, why won’t my hot tub jets work?
When jets start failing, the most likely case is that your hot tub pump is not working correctly. … Open the access panel and the airlock valve close to the pump. This releases air from the line and purge system, allowing more water to stream through the jets. Clogged filters or water intakes can also cause jet issues.
In this way, how do I reset my hot springs control panel?
Before each use of the spa, with the plug connected to the power supply and the unit operating, push the “Test” button. The unit should stop operating and the GFCI power indicator will go out. Wait 30 seconds and then reset the GFCI by pushing the “Reset” button.
Can you use Windex to clean a hot tub?
The day before emptying your hot tub be sure to shock the water and turn on all of the jets for at least 30 minutes to clean out the pipes of any dirt or debris that may be in them. … We recommend cleaning products such as 409, Windex, or a light bleach cleaner.
How do you clean a hot tub that has been sitting?
Draining the water is the best way to clean a hot tub that has been sitting for awhile. If your water is in fair condition, looking hazy but without visible algae or biofilm growth, skip ahead to the next step and purge the plumbing. To drain a spa or hot tub, look for the drainage port or hose.
Can you run hot tub jets with no water?
This means no water flow no heat. The only damage you could have had would be if the pump was on with no water. A hot tub is not like a water heater. It is only heating flowing water and not standing water.
How do I know if my hot tub has an airlock?
As mentioned above, the most common sign that your hot tub has an air lock is the jets not working when powered on. This can include nothing coming out of your jets when they are turned on or even a humming sound coming from the jets or pump.
